4. To connect the telephone line cord to the telephone, plug one end of the short
telephone line cord to the jack labeled TEL LINE on the back of the telephone base
Plug the other end of the short telephone line cord to the modular wall jack.
To connect the power adapter to the telephone, plug the small end of the power
adapter into the jack labeled 7.5V DC 100 mA on the back of the telephone base.
Plug the large end into a standard electrical outlet not controlled by a wall switch.
5. Press and slide the bracket down firmly so the telephone hangs securely on the
telephone outlet mounting studs. Place the handset back on the telephone base.
DSL lter
(not included)
To Next Page
Loading...
Need help?
General
