It is your responsibility to read and understand this
safety manual and the manufacturer's manual(s)
before operating your machine. This safety manual
takes you step-by-step through your working day.
Remember that YOU are the key to safety. Good
safety practices not only protect you but also
protect the people around you. Study this manual
and the manufacturer's manual(s) for your specific
machine. Make them a working part of your safety
program. Keep in mind that this safety manual is
written for only this type of machine. Practice all
other usual and customary safe working precautions,
and above all — (FIG. 1)
REMEMBER — SAFETY IS UP TO YOU
YOU CAN PREVENT
SERIOUS INJURY OR DEATH
5
A WORD TO THE USER
6
KNOW THE RULES
Every employer is concerned about safety. Safe
operation and proper maintenance of your machine
can prevent accidents. KNOW the rules — LIVE by
them. (FIG. 2)
When starting work at a new site, check with the
designated safety coordinator for specific safety
instructions. DON’T LEARN SAFETY THE HARD
WAY.
Know the meaning of all hand signals, signal flags,
signs and markings.
Know the traffic rules used at the work site. Know
who the signal person is; watch and obey their signals.
Know where the fire extinguishers and first aid kits
are kept and how to use them. Know where to get
proper aid and assistance when needed.
Use common sense to avoid accidents. If an
accident does occur, be prepared to react to it
quickly and effectively. NEVER PANIC.
Know how to use the emergency communications
system to summon help when necessary.
FOLLOW A SAFETY PROGRAM
To Next Page
Loading...
Need help?
General
