上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
Specialized, Concentrated, Focused i
Preface
About this manual
This manual is intended for manufacturers. If you use the CNC system for the first time, you need to
read through the manual. If you are experienced with the system, you can search for the desired info via
the contents.
With 6 chapters, this manual can be divided into 3 parts, as follows:
1) Part 1: preface, introducing the precautions about transportation and storage, installation,
wiring, debugging, usage, and so on. You need to read them carefully beforehand to ensure
safe operations.
2) Part 2: product, including Chapter 1~4. Chapter 1 is product overview, Chapter 2 wiring,
Chapter 3 and 4 installation and machine debugging.
3) Part 3: appendix, including Chapter 5 and 6. Chapter 5 lists parameter settings and wiring
diagrams of various drivers while Chapter 6 states the software license agreement.
Applicable Product Models
This manual is applicable to Lambda series CNC system, including NC65A/65B host, PM85A/95A
communication card and Lambda series controller. Refer to the table below for details:
Integrating CPU, 60G SSD, 1G RAM, communication card and
NcStudio motion control software, used together with Lambda
4S/5S series controller.
PM85A/95A communication
card
Self-developed multi-axis communication card, used together with
Lambda series controller.
High-performance integrated controller box, including 3L, 3S, 4S
and 5S, used together with PM85A/95A communication card or
NC65A/65B host.
Contact Us
You can contact us by the following info for technical support and pre-sales/after-sales service:
Company Name: Weihong Electronic Technology Co., Ltd.
Headquarters Address: No. 29, 2338 Duhui Rd., Minhang, Shanghai 201108
Tel: +86-21-33587550
Fax: +86-21-33587519
Website: http://en.weihong.com.cn
E-mail: sales@weihong.com.cn
To Next Page
Loading...
Need help?
General
