SETTING UP THE FIERY EXP4110 FROM THE CONTROL PANEL
22
SETTING UP THE FIERY EXP4110 FROM THE CONTROL PANEL
Setup is required the first time the Fiery EXP4110 is turned on after new system software is
loaded. In this initial Setup, you (or the service technician who loads the software) choose the
language for Fiery EXP4110 Control Panel menus and messages. If you do not configure a
particular Setup option, the Fiery EXP4110 uses default settings. Make sure the settings are
appropriate for the printing environment at your site.
Fiery EXP4110 Setup from the Control Panel
Setup performed from the Control Panel configures the Fiery EXP4110 to communicate with
other devices and manage print jobs sent to it.
Setup provides these groups of options:
•Server Setup to specify system options
•Network Setup to specify all the active network systems that transmit print jobs to the
Fiery EXP4110
•Printer Setup to specify how print jobs and queues are managed
• PS Setup to specify PostScript settings
• PCL Setup to specify PCL settings
•Job Log Setup to specify how the Fiery EXP4110 handles its log of printed jobs
•Font Archiving to back up and restore fonts
The Change Password option in the Setup menu allows you to create and change the
Administrator password on the Fiery EXP4110.
The Control Panel on the front of the Fiery EXP4110 allows you to set options and view
information about jobs printed to the Fiery EXP4110. It comprises the following parts:
• Activity light indicates normal or problem activity
• Line selection buttons select a setting and proceed to the next option
• Display window shows status information and options for setting up the Fiery EXP4110
• Up and down arrow buttons scroll menus, options, and settings
• Menu button cancels without saving changes; also toggles to the Functions menu
• Power button turns on and off the Fiery EXP4110 (button is located on the back panel)
To Next Page
Loading...
Need help?
General