Xerox 4110 Configuration And Setup

SETTING UP THE FIERY EXP4110 FROM A NETWORK COMPUTER
60
The Setup window appears.
You see the available settings only when you select the particular option. For example, to view
or change the setting for the Character Set option, click Character Set. The available settings
appear at the bottom of the window.
After making your selections in the window, click Apply, if it is present. When you finish,
click OK to close the entire Setup window.
Remote Setup
Remote Setup is performed from a computer using Configure or Command WorkStation,
Windows Edition. Remote Setup is not supported for Command WorkStation, Macintosh
Edition.
TO ACCESS CONFIGURE
1 Start your Internet browser and type the IP address of the Fiery EXP4110.
2 Click the Configure tab on the Fiery EXP4110 home page.
3 Click Launch Configure.
4 Log on as Administrator with the appropriate password.
TO ACCESS SETUP FROM COMMAND WORKSTATION, WINDOWS EDITION
1 Start Command WorkStation.
2 Log on as Administrator with the appropriate password.

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English