SETTING UP THE FIERY EXP4110 FROM THE CONTROL PANEL
25
RIP Status When the Fiery EXP4110 is processing a job, the RIP Status screen
appears. This screen displays the following:
Cancel Job: Press the top line selection button to cancel the job
currently processing. The Fiery EXP4110 cancels the job before
printing begins.
Job name: The name of the document currently processing.
User name: The name of the user who sent the job currently processing.
Kilobytes: The size (in kilobytes) of the job processed so far.
NOTE: This number is always displayed in kilobytes; for example,
10MB is displayed as 10000KB.
Info Status When the Fiery EXP4110 is not processing or printing a job, it displays
information about the current server and software:
Server Name: The Fiery EXP4110 name, as it is configured in Setup.
Status: The current status of the Fiery EXP4110. The Fiery EXP4110
status can be: Idle, Initializing, Busy, Processing, or Printing.
Megabytes: The space (in megabytes) available on the Fiery EXP4110
hard disk, for example, 756MB.
Version: The system software version running on the Fiery EXP4110.
Functions You can press the Menu button to display the Functions menu. Use the
Up and Down arrow buttons to scroll through the list. Press the button
to the right of a command to select that command. For more
information, see page 26.
Network The Network icon appears at the lower left of any of the other screens
when a job is being sent to the Fiery EXP4110 over the network. When
a remote utility is running, the Network icon appears, and the green
activity light flashes.
To Next Page
Loading...
Need help?
General