Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
4-20
Print Mode menu
Allows you to set up the settings for print quality (print mode) according to the usage of print data or
print speed.
Note:
• When "Banner 1" or "Banner 2" is set in the Print Mode menu, PalettePrint is not
displayed in the Test Print menu.
Setup item Setting Description
Type 1 to Type 30 Print Mode Sets up the print mode according to the usage of print data
or print speed.
•Pressing the [Enter] key shifts to the sub menu.
Print Mode menu
PF Adjust Allows configuration of various Media feed compensation
settings.
•Pressing the [>] key: shifts to the sub menu.
PF Adjust menu
Pre-Heater Sets up the Pre-Heater temperature.
•Pressing the [Enter] key shifts to the sub menu.
Pre-Heater Menu
Platen Heater Sets up the Platen Heater temperature.
•Pressing the [Enter] key shifts to the sub menu.
Platen Heater menu
After Heater Sets up the After Heater temperature.
•Pressing the [Enter] key shifts to the sub menu.
After Heater menu
Standby Heating Sets up the length of time to preheat the heater while the
printer is in standby mode.
•Pressing the [Enter] key shifts to the sub menu.
Standby Heating Menu
Vacuum Fan Sets up the vacuum fan operation.
•Pressing the [Enter] key shifts to the sub menu.
Vacuum Fan Menu
—
•Pressing the [Cancel] key shifts to the previous menu.
Media Type Menu
To Next Page
Loading...
Need help?
General
