Xerox 8254E User Manual

Preparing For A Job
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
3-39
Adjust Print
This is used for optimizing the image quality of prints.
Alignment must be set for each and every printing mode type.
After selecting the printing mode that you want to use, follow the procedure below to perform
Alignment.
Note:
• This printer was adjusted at the factory to produce optimum print quality.
You may have to adjust the print head if the print quality is reduced after the installation
environment or the media has been changed.
1. Press the [Power] key to turn the printer ON. "Ready to Print" displays in the control panel
2. Load the roll media.
.Setting Roll Media
3. Display the Printing mode menu in the control panel by doing the following.
a. Press the [Menu] key. "Menu 1: Setup>" displays in the control panel.
b. Press the [>] key. "Set1: MediaType" displays in the control panel.

Xerox 8254E Specifications

General

Brand	Xerox
Model	8254E
Category	Printer
Language	English