Xerox 8254E User Manual

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
4-49
Adjust Print Menu (Setup item 3 of 7 total)
Allows you to adjust the printer for optimum print quality (Alignment).
Access this menu by pressing the [Menu] key which causes "Menu1: Setup>" to appear in the control
panel’s display. Pressing the [-] key twice causes "Menu3: Adjust Print>" to display. (The > character
after a menu name indicates that there are sub-menus under that menu.)
From the "Menu3: Adjust Print>" display, press the [>] key. This takes you to the first sub-menu titled
"Adj.1: Confirm." Pressing the [-] and [+] keys allows you to increment up or down to each of the Setup
items in the left column below.
Alignment must be set for each printing mode.
Adjust Print
After selecting the desired printing mode, perform an alignment.
Print Mode menu
Palette Allows Palette Printing to be performed.
Used to compare actual colors of the printer to colors on the computer.
Color Palette
Note:
• When "Banner 1" or "Banner 2" is set in the Print Mode
menu, PalettePrint is not displayed.
Print Mode menu
—
•Pressing the [Enter] key causes "Printing" to be displayed in the control panel
and the test printing to start.
•Pressing the [Cancel] key shifts to the previous menu.
Setup Item Description
Confirm Prints the test pattern for Alignment.
Bi-D Quality Sets up the set value when performing two-way printing in the quality priority
mode.
Bi-D Normal Sets up the set value when performing two-way printing in the normal mode.
8264E only - Bi-D Speed Sets up the set value when performing two-way printing in the speed mode.
Pressing the [Enter] key causes "Printing" to be displayed in the control panel
and the test pattern printing to start.
Pressing the [Cancel] key shifts to the previous menu.
Setup Item Description

Xerox 8254E Specifications

General

Brand	Xerox
Model	8254E
Category	Printer
Language	English