Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
4-95
Settings that can be changed or confirmed while printing
Notes:
• The Print start menu is displayed only when the printer is warming up.
• When you change a setting during operation, be sure to select "Backup" to save
the
setting that you changed.
• If the printer returns to "Ready to Print" mode without "Backup" being selected, the
changed setting is not
saved.
Setup item Setting Description
Print Start
—
•[Enter] key: If the heater temperature does not reach the
set value during warming-up, printing starts.
Tem pe ra tu re Pre Check the current Pre-Heater temperature.
Platen Check the current Platen Heater temperature.
After Check the current After Heater temperature.
Pre-Heater Off / 30 °C to 50 °C Change the Pre-Heater temperature.
Platen Heater Off / 30 °C to 50 °C Change the Platen Heater temperature.
After Heater Off / 30 °C to 50 °C Change the After Heater temperature.
PF Adjust –20 pulse to 0 to 20
pulse
Change the feed adjustment value.
Backup — •[Enter] key: Save the changed setting.
—
•[Cancel] key: "Ready to Print" displays in the control panel.
To Next Page
Loading...
Need help?
General
