Xerox 8254E User Manual

Preparing For A Job
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
3-32
4. Press the [Enter] key. "Media Initial" displays in the control panel.
– The media type is set.
– Media initial operation starts.
Notes:
• If the following operations are performed in the media type setup menu, the printer
starts the media initial operation:
– Pressing the [Cancel] key.
– No keys on the control panel are pressed for ten seconds.
• Any time the media loading lever is raised then lowered, the printer will display "Media:
Type x OK?" The "x" represents the printer’s default media type. From the factory that
default is Type 1. Otherwise, the media type will be the last one that was used. If no keys
are pressed, the printer will default to that media type. It will display "Media Initial." The
print head will move across the width of the media and then display the media's width.
Press any key and the display will return to "Ready to Print."
– The control panel displays the Media Width.
5. If correct, press [Enter] or [Cancel]. "Ready to Print" displays in the control panel.
6. When using roll media, wind it backwards with the roll media scroller flanges until any slack is
removed.
This media loading procedure is complete.

Xerox 8254E Specifications

General

Brand	Xerox
Model	8254E
Category	Printer
Language	English