Xerox 8830 Operator's Manual

September 2001 88XX Series Folder Operator Manual 19
Cross Programs Submenu
Use this submenu to select the cross folding options.
1. Go to the “Cross Programs” submenu
in the Numeric Control Panel in the Alphanumeric Control Panel
u OPERATOR
U2 CROSS PROGRAMS
2. The default option is shown :
in the Numeric Control Panel in the Alphanumeric Control Panel
u
20 2
STANDARD
Lower right dot flashing
3. Use the scroll key to select the desired option and press “Enter” to
select it.
With selecting “STANDARD” [ u2.01 ], for example,
an E size print (36”x48”) with a program 8.5”x11” will
be folded with an output dimension 8.5”x11”. The length
of each panel (b) is not equal.
The same print could be folded with the same fan
program with the option “EQUAL” [ u2.02 ] because
the folder automatically divides the width of the print to
obtain equal panels.
The purpose of the “EQUAL” option is to obtain a folded print
more flat and folded with one less cross fold. That is why it does not
work with all sizes and styles. Only when a few millimeters of the
cross folding depth is modified, is it possible to obtain a folded print
without prefolds. The “EQUAL” option does not produce results
with Ericsson, Afnor, French and Wallets program (some of these
styles already have an output equal). Besides, it is possible to fold
equal panels only with some kind of paper rolls.
ROLL UNI/DIN fold depth ANSI/ARCH fold depth
914 (36”) 305 305
900 300 300
864 297 288
610 305 305
Selecting “CROSS OFF” [ u2.03 ] will
bypass the Cross Folder. The print will be fan
folded only and stacked in the Rear Print
Tray.
To activate the cross folder after a “Cross
Off” selection, select one of the two options:
“Standard” or “Equal”.
4. Select EXIT [ u2.00 ] to rise one level.
Cross
programs
u 2
Exit
u 2.00
Equal
u 2.01
Standard
u 2.02
Cross
off
u 2.03
11,3” - 12”
11”
6-7”

Xerox 8830 Specifications

General

Brand	Xerox
Model	8830
Category	Printer
Language	English