Xerox C230 User Manual

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
PPiittcchh
0.08–100 (10*)
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed-space
characters in a horizontal inch of type.
OOrriieennttaattiioonn
• Portrait*
• Landscape
• Reverse Portrait
• Reverse Landscape
Specify the orientation of text and graphics on the
page.
LLiinneess ppeerr PPaaggee
1–255
Specify the number of lines of text for each page
printed through the PCL datastream.
• This menu item activates vertical escapement that
causes the selected number of requested lines to
print between the default margins of the page.
• 60 is the U.S. factory default setting. 64 is the
international factory default setting.
PPCCLL55 MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
Set the initial minimum stroke width.
Note: Jobs printed in 4800 CQ use half the
value.
PPCCLLXXLL MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
AA44 WWiiddtthh
• 198mm*
• 203mm
Set the width of the logical page on A4-size paper.
Note: Logical page is the space on the physical
page where data is printed.
AAuuttoo CCRR aafftteerr LLFF
• Off*
• On
Set the printer to perform a carriage return after a line
feed control command.
Note: Carriage return is a mechanism that
commands the printer to move the position of
the cursor to the first position on the same line.
AAuuttoo LLFF aafftteerr CCRR
• Off*
• On
Set the printer to perform a line feed after a carriage
return control command.
80
Xerox
®
C230 Color Printer User Guide
Use printer menus

Xerox C230 Specifications

General

Brand	Xerox
Model	C230
Category	Printer
Language	English