MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
TTiimmeeoouutt ffoorr HHTTTTPP//FFTTPP RReeqquueessttss
1–299 (30*)
Specify the amount of time before the server
connection stops.
RReettrriieess ffoorr HHTTTTPP//FFTTPP RReeqquueessttss
1–299 (3*)
Set the number of retries to connect to the HTTP/FTP
server.
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
PPCCLL SSmmaarrttSSwwiittcchh
• Off
• On*
Set the printer to switch to PCL emulation when a print
job received through a USB port requires it, regardless
of the default printer language.
Note: If PS SmartSwitch is off, then the printer
does not examine incoming data and uses the
default printer language specified in the Setup
menu.
PPSS SSmmaarrttSSwwiittcchh
• Off
• On*
Set the printer to switch to PS emulation when a print
job received through a USB port requires it, regardless
of the default printer language.
Note: If PCL SmartSwitch is off, then the printer
does not examine incoming data and uses the
default printer language specified in the Setup
menu.
MMaacc BBiinnaarryy PPSS
• On
• Auto*
• Off
Set the printer to process Macintosh binary PostScript
print jobs.
• When set to On, the printer processes raw binary
PostScript print jobs from computers using the
Macintosh operating system.
• When set to Auto, the printer processes print jobs
from computers using either Windows or Macintosh
operating systems
• When set to Off, the printer filters PostScript print
jobs using the standard protocol.
EEnnaabbllee UUSSBB PPoorrtt
• Disable
• Enable*
Enable the standard USB port.
Note: An asterisk (*) next to a value indicates the factory default setting.
Xerox
®
C230 Color Printer User Guide 99
Use printer menus
To Next Page
Loading...
Need help?
General