User Guide 3-1
1. Remove the scanner from the shipping box, verify all parts listed on What’s in the Box are in
the box.
We recommend that you keep the original packing materials in case you need them later.
2. Remove any shipping tape from the scanner as indicated in the following illustration(s).
The illustrations are for example purposes only. Your scanner’s packaging may vary slightly.
3. Slide the release switch in the output tray if you want it to lay flat on the desk.
Connect the Scanner Power Cord
Note: Only use the power supply included with your scanner. Connecting any other type of power
supply may damage your scanner, and will void its warranty.
1. Select the appropriate power cord for your country.
2. Plug the power supply into the power port on the scanner.
3. Scanner Setup
To Next Page
Loading...
Need help?
General