Xerox
®
D70n Scanner Scanner Options, Maintenance and Troubleshooting
10-10 User Guide
Replacing the Reverse (Separation) Roller
The roller will wear out and is designed to be a user-replaceable part. A worn roller can cause
documents to feed in skewed at an angle, or multiple pages to feed at the same time. Before
replacing the roller you should clean it as excessive dust on the roller will make it appear worn and
smooth. You cannot properly diagnose a worn roller until you have cleaned it. You should generally
replace the roller between 80,000 and 100,000 scans.
Replacement parts can be purchased from the Supplies & Accessories page for your scanner at
www.xeroxscanners.com
.
1. Open the scanner.
2. Locate the roller cover in the ADF door.
3. Pinch the sides of the roller cover and pull it down to access the roller.
To Next Page
Loading...
Need help?
General