1.2 Setting the Network Environment 25
Setting the IP Address in IPv6 Mode
The printer supports IPv6 addresses. You can use IPv6 addresses with this printer under
an IPv6 network environment.
By default, [IP Mode] of this printer is set to [Dual Stack] (in Dual Stack mode, IPv4 and/or
IPv6 is automatically detected). When this printer is connected to an IPv6 network, an IPv6
address will be automatically assigned.
If you want to assign a static IP address to this printer under an IPv6-only environment, you
can manually configure a static IPv6 address.
Use the following procedure to assign a static IPv6 address to this printer.
To Set a Static Address Using CentreWare Internet Services
1. Print the [Printer Settings] list to find the IP address assigned to the printer.
You can see the IP address in the [Wired Network] column in the list.
Refer to
• For information on how to print the [Printer Settings] list, refer to "Printing the [Printer Settings] List" (P.
21).
2. Launch a web browser and access CentreWare Internet Services.
Note
• For information on how to access CentreWare Internet Services, refer to "Configuring the Printer Using
CentreWare Internet Services" (P. 28)
3. Click the [Properties] tab.
IPv6 link-local address
IPv6 stateless addresses are
listed here if they are
automatically configured.
IP address in IPv4
To Next Page
Loading...
Need help?
General