Xerox Phaser 5500 User Manual

Basic Printing
Phaser® 5500 Laser Printer
2-21
■ Place letterhead (or the top of the page) to enter the printer last.
5. If prompted at the printer’s front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
a. Select Change, then press the OK button.
b. Select the paper size or type, then press the OK button to save your selection.
6. In the printer driver, select either the paper type or Tray 1 (MPT) as the paper source.
Loading Paper in Trays 2-5 for 2-Sided Printing
Use Trays 2-5 for 2-sided printing of all standard paper sizes except postcards, B6 JIS, and
envelopes, and custom paper smaller than 140 mm (5.5 in.) in width or 182 mm (7.16 in.) in
height.
Caution
If you change the type of paper in a tray,
you must change the paper type on the
front panel to match the paper that you
loaded. If you fail to do this, print-
quality problems can occur and the
fuser can be damaged.
5500-140
5500-123

Xerox Phaser 5500 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	300, 000 pages
Maximum Paper Capacity	3, 100 sheets
Connectivity	Ethernet 10/100Base-TX, USB 2.0
Weight	55.1 lbs
Standard Memory	128 MB
Maximum Memory	512 MB
Duplex Printing	Automatic
Paper Capacity	1, 100 sheets
PDL	PCL 5e, PCL 6, PostScript 3
Network Connectivity	Ethernet
Type	Laser Printer
Supported Operating Systems	Windows, Mac, Linux