Xerox Phaser 5500 User Manual

Envelopes
Phaser® 5500 Laser Printer
2-50
Printing Envelopes from Tray 1 (MPT)
1. Insert the envelopes in Tray 1 (MPT):
■ Place C4 envelopes short-edge feed in the tray.
■ Place Monarch, #10, C5, and DL envelopes long-edge feed in the tray.
■ Place the side to be printed facedown.
■ Place the envelope with the flap entering the printer first.
2. Adjust the paper guides to the size of the envelopes.
3. If prompted at the printer’s front panel, press the OK button to accept the envelope size
that is highlighted. If you have changed the paper size or type, do the following:
a. Select Change, then press the OK button.
b. Select Envelope, then press the OK button.
c. Select the paper size, then press the OK button to save your selection.
4. In the printer driver, select Envelope as the paper type or Tray 1 (MPT) as the paper
source.
Short-Edge Feed – C4 and Some Custom Sizes Long-Edge Feed – All Other Sizes
5500-144
5500-145

Xerox Phaser 5500 Specifications

General

Brand	Xerox
Model	Phaser 5500
Category	Printer
Language	English