Xerox Phaser 5500 User Manual

Adjusting Printing Options
Phaser® 5500 Laser Printer
2-42
Selecting Print-Quality Modes
You can select from two print-quality modes, as shown in the following table:
To select the print-quality mode in a supported driver:
■ Windows 98, Windows Me PostScript driver:
On the Setup tab, select a print-quality mode.
■ Windows 2000, Windows XP, Windows Server 2003, Windows NT PostScript driver:
On the Paper/Quality tab, select a print-quality mode.
■ Mac OS 9 driver:
In the Print dialog box, click General, select Print Quality from the drop-down list, then
select the desired mode for Quality.
■ Mac OS X (version 10.1 and higher) driver:
In the Print dialog box, select Image Quality from the drop-down list, then select a print
quality mode from the Print Quality drop-down list.
Type of Print Job Print-Quality Mode
Best general-purpose mode for high-speed printing. Produces crisp, bright
prints.
600 x 600 dpi
Highest-quality prints with best detail. Recommended for photo prints.
Produces superior text resolution. This mode may take longer to process and
print than 600 x 600 dpi.
True 1200 x 1200 dpi

Xerox Phaser 5500 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	300, 000 pages
Maximum Paper Capacity	3, 100 sheets
Connectivity	Ethernet 10/100Base-TX, USB 2.0
Weight	55.1 lbs
Standard Memory	128 MB
Maximum Memory	512 MB
Duplex Printing	Automatic
Paper Capacity	1, 100 sheets
PDL	PCL 5e, PCL 6, PostScript 3
Network Connectivity	Ethernet
Type	Laser Printer
Supported Operating Systems	Windows, Mac, Linux