Xerox Phaser 6120 Reference Guide

Configuring the Printer154
PostScript
The Print/Default Setting/PostScript window provides the following
parameters for configuration. The settings are arranged in 3 columns:
Current, Custom, Factory.
Item Description
PS Error Page Print an error page if the print job cannot be printed
or creates an error.
Choices: On, Off
Default: On
Configuration Menu Equivalent:
MENU SYSTEM DEFAULT/
EMULATIONS/POSTSCRIPT/ERROR
PAGE
PS Protocol Ethernet Sets the binary communications protocol (BCP).
Choices: Binary, Quoted Binary
Default: Binary
Configuration Menu Equivalent:
MENU INTERFACE MENU/
ETHERNET/PS PROTOCOL
Save Changes Saves and applies any changes made.
Discard Changes If you made changes to any of the parameter
settings but do not wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Set as Default button Saves the changes made to Custom values.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm