Xerox Phaser 6510 User Manual

CClleeaanniinngg tthhee IInntteerriioorr
WARNING:
• Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If a sheet of
paper is wrapped around the heat roller, do not try to remove it immediately. Power off the printer
immediately and wait 40 minutes for the fuser to cool. Try to remove the jam after the printer has
cooled.
• If you spill any toner in the printer, remove the toner using a moist cloth. Never use a vacuum
cleaner to remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or explosion.
To prevent stains inside the printer that can deteriorate print quality, clean the interior of the printer
regularly. Clean the printer interior whenever you replace the drum cartridge.
After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before
closing the printer covers and doors.
• Remove any remaining pieces of paper or debris. For more information, refer to Clearing Paper
Jams.
• Remove any dust with a dry, lint-free clean cloth.
CClleeaanniinngg tthhee LLEEDD LLeennsseess
If prints have voids or light streaks through one or more colors, use the following instructions to clean
the LED lenses.
Xerox
®
Phaser
®
6510 Printer
User Guide
103
Maintenance

Xerox Phaser 6510 Specifications

General

Brand	Xerox
Model	Phaser 6510
Category	Printer
Language	English