Xerox Phaser 6510 User Manual

Configuring Remote Services Upload
Remote Services is a suite of features that simplify printer ownership and administration. It provides
free services to enable administration of metered billing and supplies replenishment plans for printers
on a network.
Before you begin, if your network uses an HTTP proxy server, obtain the information about your proxy
server. For details, refer to Setting Up a Proxy Server.
SSeettttiinngg UUpp aa PPrrooxxyy SSeerrvveerr
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator.
3. Click Connectivity.
4. For Protocols, click HTTP.
5. To enable a Proxy Server, for Proxy Server, click the toggle button.
Note: A check mark on the toggle button indicates that the setting is enabled.
6. To set the configuration type, click Setup and select an option:
• If your proxy server uses automatic configuration, select Automatic.
• If your proxy server uses a configuration script, select Configuration Script. Type the URL to
locate the configuration script.
• If your proxy server uses manual configuration, select Manual, then configure the settings. For
assistance, contact your system administrator.
7. Click OK.
EEnnaabblliinngg RReemmoottee SSeerrvviicceess
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator.
3. Click System→Remote Services Upload.
4. For Remote Services, click Enable.
5. Click OK.
202
Xerox
®
Phaser
®
6510 Printer
User Guide
System Administrator Functions

Xerox Phaser 6510 Specifications

General

Brand	Xerox
Model	Phaser 6510
Category	Printer
Language	English