Xerox Phaser 6510 User Manual

Paper Type Weight
Bond
Hole-Punched
Letterhead
Plain
Pre-Printed
75–105 g/m²
Lightweight Cardstock
Lightweight Glossy Cardstock
106–176 g/m²
SSuuppppoorrtteedd CCuussttoomm PPaappeerr SSiizzeess
Tray Number Paper Sizes
Tray 1 Minimum: 76 x 148 mm (3 x 5.8 in.)
Maximum: 216 x 356 mm (8.5 x 14 in.)
Tray 2 Minimum: 76 x 191 mm (3 x 7.5 in.)
Maximum: 216 x 356 mm (8.5 x 14 in.)
Bypass Tray Minimum: 76 x 127 mm (3 x 5 in.)
Maximum: 216 x 356 mm (8.5 x 14 in.)
2-Sided Printing, DN model only Minimum: 140 x 210 mm (5.5 x 8.3 in.)
Maximum: 216 x 356 mm (8.5 x 14 in.)
SSeettttiinngg tthhee TTrraayy MMooddee
Tray mode determines if you are prompted to confirm or modify paper settings when you load paper
in the tray. Tray mode also defines how the printer behaves when a paper conflict or mismatch
occurs.
To enable Bypass Mode:
1. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Admin Menu, then press OK.
3. Navigate to Printer Settings, then press OK.
4. Navigate to Bypass Mode, then press OK.
62
Xerox
®
Phaser
®
6510 Printer
User Guide
Paper and Media

Xerox Phaser 6510 Specifications

General

Brand	Xerox
Model	Phaser 6510
Category	Printer
Language	English