Xerox Phaser 6510 User Manual

Configuring General Settings Using the
Embedded Web Server
This section provides information to help you configure general settings for the printer from your Web
browser using the Embedded Web Server. You can configure settings such as power saver mode,
alerts, and print job policies.
VViieewwiinngg PPrriinntteerr IInnffoorrmmaattiioonn
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
The Embedded Web Server Home page appears.
2. In the printer status area, click Details.
The Device Details page opens, showing printer information, network connectivity details, and system
administrator information.
SSeettttiinngg tthhee DDaattee aanndd TTiimmee UUssiinngg tthhee EEmmbbeeddddeedd WWeebb
SSeerrvveerr
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, click System→Date & Time.
Note: If this feature does not appear, log in as a system administrator. For details,
refer to Logging In as the Administrator.
3. In the Date area, for Date Format, select an option.
4. For Date, click the date field, then select the current date from the calender.
5. In the Time area, select the desired clock options, then enter the current time.
6. To set the time zone, click Time Zone, select your time zone from the list, then click OK.
7. To enable or disable Daylight Savings Time, click the toggle button.
Note: A check mark on the toggle button indicates the setting is enabled.
8. To enable or configure Time Server Synchronization, for SNTP, click Edit.
154
Xerox
®
Phaser
®
6510 Printer
User Guide
System Administrator Functions

Xerox Phaser 6510 Specifications

General

Brand	Xerox
Model	Phaser 6510
Category	Printer
Language	English