EasyManuals Logo
Home>Xerox>Printer>Phaser 6510

Xerox Phaser 6510 User Manual

Xerox Phaser 6510
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #148 background imageLoading...
Page #148 background image
Connecting the Printer
CCoonnnneeccttiinngg ttoo aa WWiirreelleessss NNeettwwoorrkk UUssiinngg tthhee
EEmmbbeeddddeedd WWeebb SSeerrvveerr
When connecting to a wireless network that does not include a WPS-compliant router, set up and
configure the printer manually. Before starting, obtain the router setup and configuration
information, such as name and passphrase. For assistance, contact your system administrator.
Note:
To use the Embedded Web Server to set up the printer on a wireless network, connect the
printer to your computer through an Ethernet wired network.
Wireless networking is available only on printers with the optional Wireless Network
Adapter installed.
To connect to a wireless network manually from the Embedded Web Server:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
Note: If you do not know the IP address for your printer, refer to Finding the IP
Address of Your Printer.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator.
3. Click Connectivity.
4. For Connections, click Wi-Fi.
5. In the SSID field, enter the network SSID.
6. To select the Network Type, from the menu, select Infrastructure or AdHoc.
Note: The Infrastructure network type provides the greatest selection of security
options. AdHoc provides only WEP encryption in most networks.
7. To select Encryption, for Security Settings, select the appropriate security option for your router.
8. To remove the dots in the Passcode fields, select the dots, then press the backspace key.
9. In the Passcode field, enter the network passcode.
10. In the Retype Passcode field, reenter the network passcode.
11. Click OK.
12. To activate your changes, at the prompt, click Restart Now.
13. Disconnect the Ethernet cable from the printer.
Note: When the printer restarts, it uses the information from the Embedded Web
Server to connect with the wireless router.
148
Xerox
®
Phaser
®
6510 Printer
User Guide
System Administrator Functions

Table of Contents

Other manuals for Xerox Phaser 6510

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 6510 and is the answer not in the manual?

Xerox Phaser 6510 Specifications

General IconGeneral
BrandXerox
ModelPhaser 6510
CategoryPrinter
LanguageEnglish

Related product manuals