• For 1-sided printing, load Letterhead or pre-printed paper face up with the top edge going into
the printer.
• For 2-sided printing, load Letterhead and pre-printed paper face down with the top edge going
into the printer.
Note: Do not load paper above the maximum fill line on the width guides.
Overfilling the tray can cause the printer to jam.
6. Adjust the width guides until they touch the edges of the paper.
7. If the control panel prompts you, verify the paper size and type on the screen. If not, change the
paper settings.
Xerox
®
Phaser
®
6510 Printer
User Guide
65
Paper and Media