Advanced Features and Troubleshooting Manual 13
Color and Color Sampler Charts
7. Scroll to the desired print quality mode by pressing the Down Arrow key.
8. Press the OK key to select that print quality mode.
9. Return to the Job Defaults Menu by pressing the Back key.
10. Scroll to Set TekColor Correction by pressing the Down Arrow key.
11. Press the OK key.
12. Scroll to the desired color correction by pressing the Down Arrow key.
13. Press the OK key to select that color correction.
To print the color sampler chart, on the printer's front panel:
1. With Menus highlighted, scroll to the Printable Pages Menu by pressing the Down
Arrow key.
2. Press the OK key.
3. Scroll to either Print CMYK Sampler Pages or Print RGB Sampler Pages by
pressing the Down Arrow.
4. Press the OK key.
Printing the colors from an application
1. Using the color sampler chart, select the desired colors in your application.
2. From your application, apply the desired colors in your document or graphic by
entering the specific CMYK or RGB values as indicated on the sampler chart.
3. When you print your document or graphic, select the same color correction and print
quality mode in the printer driver that you used to print the color sampler chart.
Printing the color sampler charts with CentreWare IS
1. Access your printer’s Internet Services home page; refer to page 29 for more
information.
2. Click the Print button to display the Print tab.
3. On the left side of the page, click Print Color Samplers.
4. On the Print Color Samplers page, select the color sampler (either RGB or CMYK) and
click the green button.
To Next Page
Loading...
Need help?
General