Xerox Phaser 7700 Advanced Features And Troubleshooting Manual

Advanced Features and Troubleshooting Manual 35
Printer Management
To turn Intelligent Ready mode on or off from the printer’s front panel:
1. With Menus highlighted, press the OK key.
2. Scroll to the Printer Setup Menu by pressing the Up Arrow or Down Arrow key.
3. Press the OK key.
4. Scroll to Intelligent Ready by pressing the Up Arrow or Down Arrow key. The
end of the line also displays the setting (On or Off).
5. To change the setting, press the OK key.
To select Intelligent Ready mode or schedule warmup/standby settings using
CentreWare IS Printer Management software:
1. From your printer’s Internet Services home page, click Properties.
2. On the left side of the Properties page in CentreWare IS, click Warmup.
3. For Warmup Mode, select either Intelligent Ready or Scheduled (if you want to
specify the warmup/standby settings for each day).
4. If you selected Scheduled in Step 3, make selections for each day’s warmup setting
and standby setting.
5. Click the Save Changes button on the bottom of the page.
Note
Although the front panel selections only enable you to turn Intelligent Ready
mode on or off, CentreWare IS enables you to specify other settings, such as the
printer’s warm-up times.
Front panel language
To change the language used for the text on the front panel:
1. On the front panel, with Menus highlighted, press the OK key.
2. Scroll to the Printer Setup Menu by pressing the Up Arrow or Down Arrow key.
3. Press the OK key.
4. Scroll to Set Front Panel Language by pressing the Up Arrow or Down Arrow
key.
5. Press the OK key.
6. Scroll the desired language by pressing the Up Arrow or Down Arrow key.
7. Press the OK key.
Note
You can also hold down the Cancel key and press the Info keys to display the
Set Front Panel Language menu.

Xerox Phaser 7700 Specifications

General

Brand	Xerox
Model	Phaser 7700
Category	Printer
Language	English