Xerox Phaser 7700 Advanced Features And Troubleshooting Manual

Advanced Features and Troubleshooting Manual 33
Printer Management
Protected mode for the front panel menus
You can have the printer enter "protected mode" to prevent users from changing front
panel settings that may impact the prints of other users. Instead, users select printing
features, such as color corrections, through the printer drivers only. In protected mode,
users can access all menus except the Printer Setup Menu, the Network Setup Menu, the
Service Tools Menu, and the calibration menus.
Note
You can temporarily override protected mode. Enter the menu system
(by highlighting Menus and pressing the OK key), hold down the Cancel key and
press the Back key. You can then access the Printer Setup Menu or the
Network Setup Menu. These two menus are hidden again as soon as you exit
the menu.
There are two methods for entering/exiting protected mode:
■
Using CentreWare IS Printer Management software
■
Using utility files
To enter/exit protected mode using CentreWare IS Printer Management software:
1. From your printer’s Internet Services home page, click Properties.
2. On the left side of the Properties page in CentreWare IS, click Printer Defaults.
3. If desired, change the setting for Front Panel Menus (under User Preferences on the
Printer Defaults page).
■
Select Off to have the front panel display all menus.
■
Select On to limit the menu items displayed on the front panel.
4. Click the Save Changes button on the bottom of the page.
To enter/exit protected mode using utility files:
To enter or exit protected mode, download one of the following utility files:
■
Macintosh:
■
Menu Short — limits menu access
■
Menu Long — expands menus
Refer to page 39 for downloading instructions.
■
PC:
■
MENUSHRT.PS — limits menu access
■
MENULONG.PS — expands menus
Refer to page 41 for downloading instructions.

Xerox Phaser 7700 Specifications

General

Brand	Xerox
Model	Phaser 7700
Category	Printer
Language	English