Xerox Phaser 7700 Advanced Features And Troubleshooting Manual

20 Phaser 7700 Color Printer
PhaserPrint Plug-in for Photoshop
PhaserPrint Plug-in for Photoshop
The PhaserPrint™ plug-in, included on the printer’s CD-ROM, operates within the
Photoshop application on Macintosh computers. With PhaserPrint, you can improve
image transfer time and gain easy access to Phaser printer features and other media
features.
Note
PhaserPrint software produces correct output only on supported Phaser printers.
If you use this plug-in with a printer not listed in the PhaserPrint dialog box, the
image may be placed incorrectly on the page, the colors may look incorrect, or
the file may not print.
Installing the plug-in
Compatibility requirements:
■
Photoshop 3.0 and higher
■
System 7.6.1 and higher
To install the plug-in on the Macintosh:
1. From the printer’s CD-ROM, run the Installer application.
2. Select either Easy Install or Custom Install.
3. When performing a custom install, select PhaserPrint plug-in for Photoshop.
4. Click the Install button. The file is then installed in the Photoshop application’s
folder on your computer’s hard disk.
Using the plug-in
1. Specify the default printer:
a. Open the Chooser.
b. Select a PostScript driver (such as the Apple LaserWriter 8).
c. Select your printer.
Note
PhaserPrint software works like a printer driver, and prints to the
printer you selected in the Chooser.
2. Open Photoshop and open an image file.

Xerox Phaser 7700 Specifications

General

Brand	Xerox
Model	Phaser 7700
Category	Printer
Language	English