• For short-edge feed:
• Insert letterhead and pre-printed paper face down with the top edge to the left.
• Load hole-punched paper with the holes toward the front.
Note: Use short-edge feed for custom-size paper and special media.
6. To adjust the length and width guides to fit the paper, pinch the guide locks, then slide the paper
guides in until they touch the paper.
7. Slide the tray back into the printer.
8. At the control panel, select the correct paper size, type, and color.
• If letterhead paper is loaded in the printer, for type, select Letterhead.
• If pre-printed paper is loaded in the printer, for type, select Pre-printed.
9. To confirm the settings, touch OK.
118
Xerox
®
VersaLink
®
C8000/C9000 Color Printer
User Guide
Paper and Media
To Next Page
Loading...
Need help?
General