Replacing Staples in the Booklet Maker of the Office Finisher LX
WARNING: Do not perform this procedure while the printer is printing.
1. Open the finisher side cover.
2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening
and slide them to the center.
3. Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.
160
Xerox
®
VersaLink
®
C8000/C9000 Color Printer
User Guide
Maintenance
To Next Page
Loading...
Need help?
General