• Load pre-printed paper face down with the top edge to the right.
• For short-edge feed and 2-sided printing:
• Load letterhead or pre-printed paper face up with the top edge to the right.
• Load hole-punched paper with the holes toward the front.
Note: Do not load paper above the maximum fill line on the width guides. Overfilling the
tray can cause the printer to jam.
6. Adjust the width guides until they touch the edges of the paper.
7. At the control panel, select the correct paper size, type, and color.
• If letterhead paper is loaded in the printer, for type, select Letterhead.
• If pre-printed paper is loaded in the printer, for type, select Pre-printed.
8. To confirm the settings, touch OK.
124
Xerox
®
VersaLink
®
C8000/C9000 Color Printer
User Guide
Paper and Media
To Next Page
Loading...
Need help?
General