4. Remove the jammed staples by pulling them in the direction shown.
WARNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
5. Hold the tabs on both sides of the staple cartridge and insert it into the original position in the
finisher.
Note: If you have trouble inserting the cartridge, ensure that the staples are positioned
correctly in the cartridge.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both
staple cartridges contain staples.
6. Starting at Step 2, repeat the procedure for the other staple cartridge.
7. Close the side cover of the Office Finisher.
208
Xerox
®
VersaLink
®
C8000/C9000 Color Printer
User Guide
Troubleshooting
To Next Page
Loading...
Need help?
General