Troubleshooting
Xerox
®
WorkCentre
®
4265 Multifunction Printer 163
User Guide
Clearing Paper Jams at the Bypass Tray
1. Remove any paper from the bypass tray. Where the tray connects to the printer, clear any paper
that is jammed.
2. If the paper is torn, check inside the printer for pieces of paper, then gently remove them. If you
cannot remove the paper fragments easily, contact your Xerox representative.
WARNING: The area around the fuser can be hot. Use caution to avoid injury.
3. When you reload the bypass tray, fan the paper and ensure that all four corners align neatly.
4. If the control panel prompts you, verify the size and type on the screen.
5. Touch Confirm.
To Next Page
Loading...
Need help?
General
