Xerox WorkCentre 4265 User Manual

Paper and Media
66 Xerox
®
WorkCentre
®
4265 Multifunction Printer
User Guide
4. For envelopes with adhesive short-edge flaps, load the envelopes with the print side down, flaps
closed, and flaps feeding into the printer.
5. If the control panel prompts you, verify the paper size, type, and color in the Paper Settings screen.
6. When finished, touch Confirm.
Labels
You can print labels from any tray.
Guidelines for Printing Labels
• Use labels designed for laser printing.
• Do not use vinyl labels.
• Do not feed a sheet of labels through the printer more than once.
• Do not use dry gum labels.
• Print only on one side of the sheet of labels. Use full sheet labels only.
• Store unused labels flat in their original packaging. Leave the sheets of labels inside the original
packaging until ready to use. Return any unused sheets of labels to the original packaging and
reseal it.
• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing
them in extreme conditions can cause print-quality problems or cause them to jam in the printer.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and
jam in the printer.
• In the print driver software, select Label as the paper type.
• Before loading labels, remove all other paper from the tray.
CAUTION: Do not use any sheet where labels are missing, curled, or pulled away from the backing
sheet. It could damage the printer.

Xerox WorkCentre 4265 Specifications

General

Brand	Xerox
Model	WorkCentre 4265
Category	All in One Printer
Language	English