Paper and Media
58 Xerox
®
WorkCentre
®
4265 Multifunction Printer
User Guide
Loading Paper in a 520-Sheet Feeder (Trays 1-4)
To load paper in a 520-sheet feeder:
1. Pull out the tray until it stops.
2. Move the length and width guides out:
a. Pinch the guide lever on each guide.
b. Slide the guides outward until they stop.
c. Release the levers.
3. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
To Next Page
Loading...
Need help?
General
