EasyManuals Logo
Home>Xerox>All in One Printer>WorkCentre 7242

Xerox WorkCentre 7242 User Manual

Xerox WorkCentre 7242
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
11 IPP (Internet Printing Protocol)
116 Xerox WorkCentre 7232/7242 System Administration Guide
IPP Environment
System configuration
The machine supports Internet Printing Protocol (IPP). As Windows 2000/Windows XP/
Windows Server 2003/Windows Me/Windows Vista are installed with the client
software needed to output to an IPP printer, you can specify this printer using the Add
Printer Wizard. Using IPP, you can print to a remote printer through the Internet or
intranet.
The transport protocol for IPP can be TCP/IP.
Target computers
The following operating systems support IPP.
NOTE: For Internet printing from a Windows Me computer, the IPP port should be
installed. For the IPP port installation, see the Windows Me documentation.
IPP Installation
Use the following procedure to install and use the machine in an IPP environment.
Installation Procedure
There are three stages.
Network Communication Setup
The machine needs to be set up for IPP.
Workstation Setup
The workstation needs to be configured to submit print data to the machine.
Test Print
A print job should be submitted to make sure that the machine has been installed and
configured correctly.
Connection OS Protocol
IPP port Windows 2000
Windows XP
Windows Server 2003
Windows Me
Windows Vista
TCP/IP

Table of Contents

Other manuals for Xerox WorkCentre 7242

Questions and Answers:

Xerox WorkCentre 7242 Specifications

General IconGeneral
BrandXerox
ModelWorkCentre 7242
CategoryAll in One Printer
LanguageEnglish

Related product manuals