Xray T1 User Manual

20
30 6131 SET OF BATTERY BACKSTOPS T1FK'05
30 6162 6-CELL BATTERY STRAP T1FK'05 (OPTION)
30 6300 ANTENNA MOUNT
30 6310 ANTENNA TUBE (2)
30 9310 WHEEL MOUNTING HARDWARE (4+4)
30 9400 BODY CLIP (8)
80 3001 HUDY 24 MM WHEELS STARBURST - WHITE (4)
90 4306 HEX SCREW SFH M3x6 - SILVER (10)
90 4308 HEX SCREW SFH M3x8 - SILVER (10)
309310
309400
904308
803001
306310
306300
306131
TIRES & INSERTS
NOT INCLUDED
NOT INCLUDED
NOT INCLUDED
NOT INCLUDED
904306
ACCESSORY ASSEMBLY
1. Mount the receiver and speed controller to the chassis
using double-sided tape.
2. Mount the #306300 antenna holder to the chassis in
an available position using a #904308 (SFH M3x8) screw.
3. Slide the receiver's antenna wire through the #306310
antenna tube, and then place the wire in the slot on the
side of the antenna mount.
4. Push the base of the antenna tube firmly into the hole
of the antenna mount, making sure you don't pinch or cut
the antenna wire.
904308
SFH M3x8
DOUBLE-SIDED
TAPE
RECEIVER
SPEED
CONTROLLER
NOT INCLUDED
TAPE
904308
SFH M3x8
904306
SFH M3x6
Attach the four front and rear battery stops to the
chassis using #904308 (SFH M3x8) screws.
Attach the two side battery stops to the chassis
using #904306 (SFH M3x6) screws.
M3x8
M3x8
M3x6
BAG
09

Xray T1 Specifications

General

Brand	Xray
Model	T1
Category	Motorized Toy Car
Language	English