Operation
Operation Manual 48
Pre-Operation Inspection Checklist
Coolant reservoir level. Add radiator coolant, if necessary.
Engine oil level. Add engine oil, if necessary.
Electrical wires and connectors.
Walk around the ENTIRE forklift while visually performing the pre-operation inspection.
Check that “Do Not Operate” tags have not been placed on the forklift.
Check that load capacity charts are legible.
Check that frame level indicator is working properly.
Check condition and operation of the seat belt and mounting hardware.
Check that Operation and Safety Manual is in the protective case and legible.
Check forks for welds, cracks, misalignment, or any other damage.
Check all hydraulic hoses and hose connections for wear or leaks.
Check tilt cylinders for leaks or any other damage
Check boom for straightness or any other damage.
Check all four (4) tires and wheels for:
Punctures, cracks, cuts, gouges, bulges, foreign objects, or any other damage to tires.
Loose or missing lug nuts.
Check that carriage fork pins are straight and in place to prevent forks from changing position or coming o the carriage.
Check front and rear sway cylinders and hoses for leaks or any other damage.
Check mirrors for cracks, cleanliness, and proper adjustment.
Check engine compartment for:
Loose or damaged belts, hoses, and radiator fan blades.
Check electrical connections on rear sway cylinder.
Bent anges or any other damage to rims.
Check hydraulic reservoir sight gauge for proper uid level. Add hydraulic uid, if necessary.
Check front and rear axles for leaks or any other damage.
Check boom lift and carriage master tilt cylinders and hydraulic lines for leaks or any other damage.
Check battery terminals for corrosion.
Check battery for cracked, melted, or damaged case.
. Check that all labels are present and legible. Replace any damaged or illegible labels.
Check that operator’s cab is empty of all trash, debris, or any loose items.
Check that personal belongings are secured in the personal storage box.
Check that pedals, and non-skid surfaces are clean and free of grease, oil, dirt, snow, or ice.
Date: __________________________ Initials: __________________________
Check transmission uid level.
To Next Page
Loading...
Need help?
General
