Operation Manual5
Introduction
This Operation and Safety Manual provides the information
needed to safely operate the XR1245 Reach Forklift.
This manual should be considered a permanent part of the
forklift, and kept in the protective manual case located in the
operator’s cab.
Before operating the forklift, read this manual complete-
ly and carefully to understand the safety instructions
and the operation of controls and safety equipment. You
must comply with all DANGER, WARNING, and CAUTION
notices. They are for your benet.
Improper operation of this forklift could result in death or
serious injury.
BEFORE starting the engine, do the following:
• Read the Operation and Safety Manual
• Read all the Safety Labels on the Forklift
• Clear the area of all other persons
Learn and practice safe use of forklift controls in a safe,
clear area, BEFORE you operate this forklift on a work site.
It is your responsibility to observe applicable laws and
regulations and to follow manufacturer’s instructions on
forklift operation and maintenance.
Replacement manuals for the XR1245 Reach Forklift can be
obtained by contacting our parts department by phone or
visiting our website:
Xtreme Manufacturing
Phone: (800) 497-1704
www.XMFG.com
When contacting our parts department, please have the
forklift serial number available. The serial number plate is
located in the operator’s cab, at the base of the seat.
For easy reference, you can record the serial number in the
space below.
Serial Number:
Figure 1. Serial Number Plate
Right side, left side, front, and rear are directional references
given from the operator’s seat when facing forward.
Figure 2. Forklift Direction Orientation
Warning
Notice
FRONT
REAR
RIGHT
LEFT
General
Replacement Manuals
Model / Serial Plate
Orientation
Introduction
To Next Page
Loading...
Need help?
General
