SonTek, a Xylem brand
122 RiverSurveyor S5/M9 System Manual (February 2013)
tionary Live software, however, the ADP operates from a fixed mounted position, stationary
vessel, or platform (such as a SonTek Hydroboard or Tri-hull boat).
This measurement procedure is similar to that used for the SonTek FlowTracker and is in ad-
herence to ISO velocity area measurement techniques. Measurements are made at stationary
positions, usually along a tagline, to obtain a more precise representation of the mean velocity
profile and therefore determine discharge.
Stationary-Measurement can be used in a wide range of applications such as:
• Discharge Measurements
• Current Profiling across transects
• Under Ice Measurements (available in future release)
G-2. System Requirements
RiverSurveyor Stationary Live requires the following specifications for the PC.
Windows Vista or Windows XP
1.6 GHz processor
1 GB memory
1 GB disk space
1024 x 768 Screen Resolution
G-3. Installation
To install the RiverSurveyor Stationary Live software on your PC, insert the distribution CD into
your CD-ROM drive. The program should automatically start and display the Installation Menu
(Figure 106). If the installation menu does not appear in a few seconds, click Start|Run on your
PC and type D:\install.exe, where d:\ is the letter of your CD-ROM drive.
Figure 106. Installation Menu
To Next Page
Loading...
Need help?
General
