Yaesu FT-70DR Instruction Manual

• Offset Direction
Set the frequency shift direction.
OFF: The transmit frequency is not shifted.
-RPT: The transmit frequency is shifted to the minus offset.
+RPT: The transmit frequency is shifted to the plus offset.
-/+ The transmit frequency is not shifted.
• AUTO MODE
When tick the check box of AUTO MODE, the receive mode (FM mode or AM mode) is automatically se-
lected. Un-ticking the checkbox enables selecting the operating mode.
• Operating Mode
Select the operating mode for receive channel.
FM: The selected frequency band is set to FM mode.
AM: The selected frequency band is set to AM mode.
• AMS
The AMS (Automatic Mode Select) function automatically selected the transmission mode in accordance
with the received signals may set ON/OFF.
• DIG/ANALOG
The V/D mode (DN), the Voice FR mode (VW) and the ANALOG mode (FM/AM mode) are selectable.
When the Set Mode [16 DIG VW] is set to “OFF”, the Voice FR mode (VW) can not be selected.
• Name
Enter the desired memory name (up to 6 digits).
• Tone Mode
This item selects the Audio Squelch Code type.
• CTCSS Frequency
This item selects the Tone Frequency of the Tone Squelch.
• DCS Code
Select the DCS code when DCS is set.
• DCS Polarity
Change the phase inversion of the DCS code for receive/transmit. When communication using the DCS
code cannot be achieved, changing the phase inversion might enable the DCS code communication.
21
ADMS
-
10 Instruction Manual

Yaesu FT-70DR Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Modes	FM, C4FM
Battery	7.4V 1800mAh Li-ion
Waterproof Rating	IP54
Receiver Type	Double-Conversion Superheterodyne
Weight	9.9 oz (with battery)
GPS	No