Yaesu FTA-230 User Manual

FTA-230 OperATing MAnuAl
11
BeFore you BegIn
Battery Charging
It is necessary to charge the Ni-MH battery fully before
its rst use. Follow these procedures:

Install the supplied
FNB-83
Ni-MH battery pack
onto the transceiver. Ensure that the transceiver is
switched off.
UseforPA-48/CD-32
1. Insert the cable plug into the jack located on the
right side of the
CD-32
Charging Cradle then plug
the
PA-48
Battery Charger into the AC line outlet.
2. Insert the transceiver and battery pack into the
CD-
32
; the antenna jack should be at the left side when
viewing the charger from the front.
3. If the transceiver and battery pack are inserted cor-
r e c t l y, t h e R E D
i n d i c a t o r o n t h e
CD-32
will glow.
A fully-discharged
pack will be charged
compl ete ly in 12
hours.
UseforCD-59
1. Insert the cigarette lighter plug into the cigarette
lighter socket (DC 11 V ~ 16 V).
2. Insert the transceiver and battery pack into the
CD-
59
; the antenna jack should be at the left side when
viewing the charger from the front.
3. If the transceiver and battery pack are inserted cor-
rectly, the RED indicator on the
CD-59
will glow. A
fully-discharged pack will be charged completely in
15 hours.
CD-32
PA-48
CD-59
DC11V~16V

Yaesu FTA-230 Specifications

General

Brand	Yaesu
Model	FTA-230
Category	Transceiver
Language	English