28
memory operatIon
The
FTA-230
provides 150 user-programmable “Main”
memories, labeled “
CH-001
” through “
CH-150
,”
and up to 100 pre-programmed memories, designated
“Book” Memories. The “ ” icon appears when the
“Book” Memory Mode is activated.
The Main memories and “Book” Memories can be as-
signed alpha-numeric names of up to eight characters.
Memory System Operation
The
FTA-230
’s Main Memory system allows the user
to store, label, and recall channel frequencies which
you may want to use frequently. You may store VFO
frequencies, Book Memory frequencies, and/or Weather
Channel frequencies (USA version only) into the Main
Memory system.
Memory Storage
Select the desired frequency in the VFO mode, or
recall the Book Memory channel or Weather chan-
nel to be stored in the Main Memory.
Press and hold in the
[
MW
(
SPL-W
)]
key for
2 seconds. The memo-
ry channel number will
blink on the LCD.
W i t h i n f i v e s e c -
onds of pressing the
[
M W
(
S P L - W
) ]
k e y,
rotate the
DIAL
selector
knob to select the desired
memory channel number
for storage. In order to prevent writing over memory
channels, an “underline” will appear under the hy-
phen (located between “CH” and the channel num-
ber) to indicate a vacant memory channel.
Now press and hold in the
[
MW
(
SPL-W
)]
key for
2 seconds; you will now see blinking “
A
” on the
LCD. To attach an alpha/
numeric name (label) to
the memory, proceed to
the next step; otherwise
To Next Page
Loading...
Need help?
General
