30
Recalling the Memories
Pres s the
[
ENT
(
)]
key, repeatedly if
necessary, until “
-
MR
-
” (Memory Recall)
appears on the display.
In the MR mode, you
will see “CH-” and the
previously selected chan-
nel number appearing on
the LCD.
Rotate the
DIAL
selector
knob
to select the desired memory channel.
You may change the title structure of the Memory
display type among:
1. Channel Indication (sequential Channel Num-
ber, e.g. CH-001, CH-002, etc.);
2. Frequency Indication (e.g. 122.500); or
3. Alphanumeric Label (e.g. LAX FSS).
To change the Memory
display title, press the
[
(
SET
)]
key repeat-
edly, if necessary, until
you get the desired dis-
play title structure.
To exit the Memory mode, press the
[
ENT
(
)]
key three times to return to the VFO mode.
: If you change a function of
DIAL
and
[
]
/
[
]
key by pressing the
[
F
]
key followed by the
[
5
(
DIAL/
)]
key, you may select the memory
channel by pressing the
[
]
/
[
]
key.
memory operatIon
“Frequency IndIcatIon”
“alphanumerIc laBel”
“channel IndIcatIon”
To Next Page
Loading...
Need help?
General
