26
The
FTA-230
also provides for adjustment of the
“Hang-Time” of the VOX system (transmit-receive de-
lay after the cessation of speech) via the Menu. The de-
fault delay is one second. To set a different delay time:
Press the
[
F
]
key momentarily, then press the
[
(
SET
)]
key to activate
t h e M e n u ( “ S E T ” )
mode.
Rotate the
DIAL
selec-
tor knob to select Menu
Item “
VDLY
.”
Press the
[
ENT
( )]
key to enable adjustment
of this Menu item.
Rotate the
DIAL
selector
knob to select the delay
time among “05,” “10,” “15,” and “20” (representing
0.5, 1.0, 1.5, and 2.0 sec).
When you have made your selection, press the
[
ENT
( )]
key to save the new setting, and then
press the
PTT
switch to exit to normal operation.
Side Tone Feature
(
monitoring your voice
)
When using the after-market Headset, you may monitor
your transmitted voice from the headset for monitoring.
To set the side tone (monitor) level:
Press the
[
F
]
key mo-
mentarily, then press
t he
[
(
S E T
) ]
k e y
to activate the Menu
(“SET”) mode.
Rotate the
DIAL
selec-
tor knob to select Menu
Item “
STLV
.”
Press the
[
ENT
(
)]
key
to enable adjustment of
this Menu item.
Rotate the
DIAL
selector knob to select the desired
monitoring level (1, 2, or 3).
When you have made your selection, press the
[
ENT
( )]
key to save the new setting, and then
press the PTT key to exit to normal operation.
advanced operatIon
To Next Page
Loading...
Need help?
General
