Yamaha CD-N301 User Manual

CONNECTIONS
10 En
You can play back music files stored on your PC or NAS, audio contents on the Internet radio, by connecting this unit to
a network.
Connect with a commercially available STP (shielded twisted pair) network cable (CAT-5 or higher, straight-through
cable).
• For details on Internet connection, refer to the owner’s manuals of your network devices.
• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit. If you are using a router
that does not support DHCP, configure the network setting from “Network Config” in the setup menu (☞ P.28).
• Wired connections are recommended for devices other than the mobile to ensure high sound quality.
• Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the
unit to the network devices or the Internet. In this case, change the setting of the security software or network devices.
• When setting the subnet manually, each server must be connected to the same subnet as the unit (☞ P.28).
Connecting to a network (PC/NAS/Internet connection)
Notes
LAN
WAN
PC
NAS
Internet
Modem
Broadband router
This unit (CD-N301)
Network cable

Yamaha CD-N301 Specifications

General

Frequency range	2 - 20000 Hz
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.003 %
CD-R playback	Yes
CD changer	No
Device type	HiFi CD player
Product color	Silver
Number of decks	1 deck(s)
Disc loading type	Tray
Digital audio coaxial out	1
Power consumption (typical)	10 W

Weight and Dimensions

Depth	260 mm
Width	435 mm
Height	86 mm
Weight	3200 g