Yamaha CD-N301 User Manual

CONNECTIONS
11 En
English
PREPARATION
When you have established all cable connections, turn on this unit and other system components.
With the power switch on, you can switch this unit to on or standby mode by pressing the power button on the remote
control.
When network standby mode is enabled, you can also control the power etc. from a network device.
❚ Operable functions in standby/network standby
To enable network standby mode, set “System Config” → “Network Standby” to “On” from the setup menu (☞ P.28).
y
When no operations are performed for a specific length of time, the unit automatically switches to standby mode (auto power standby).
You can set the time to switch to standby mode in “System Config” → “AutoPowerStdby” from the setup menu (☞ P.28).
Turning on this unit
CD eject AirPlay
Power-on by the
application
Standby
Operable — —
Network Standby
Operable Operable Operable
SELECT
PUSH
PURE DIRECTSOURCE
ENTER
RETURN
Press the power switch to turn this unit on.

Yamaha CD-N301 Specifications

General

Frequency range	2 - 20000 Hz
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.003 %
CD-R playback	Yes
CD changer	No
Device type	HiFi CD player
Product color	Silver
Number of decks	1 deck(s)
Disc loading type	Tray
Digital audio coaxial out	1
Power consumption (typical)	10 W

Weight and Dimensions

Depth	260 mm
Width	435 mm
Height	86 mm
Weight	3200 g